產品簡介
詳細介紹
多功能耐碎石沖擊試驗機是特別為汽車材料及表面涂層的抗砂礫碰撞試驗而設計的。
符合SAE、ASTM、VDA、GM、Ford、Chrysler、Mazda、JIS、Nissan、VW及Toyota等的測試要求,也可滿足JIS低溫耐碎石沖擊試驗。
MTG impact resistance testing machine is specially designed for the anti grit impact test of the auto material and the surface coating.. It can meet the requirements of ASTM, VDA, GM, Ford, SAE, Chrysler,, Mazda, JIS, Nissan, VW, Toyota and JIS, and can also meet the low temperature resistance to the impact of the impact test..
多功能耐碎石沖擊試驗機遵守下列機構的測試試驗程序的要求:
MTG resistance to the impact of the gravel impact testing machine to comply with the requirements of the test procedures of the following agencies:
1.汽車工程師協會(SAE)Association of auto engineers
2.美國測試與材料協會(ASTM)American Association for testing and materials
3.德國汽車工作協會(VDA)German Auto Association
4.通用汽車(GENERAL MOTORS)General Motors
5.克來斯勒(CHRYSLER)
6.大眾(VOLKSWAGEN)
7.福特汽車(FORD MOTOR)
8.豐田(TOYOTA)
9.馬自達(MAZDA)
10.尼桑(NISSAN)
技術參數
EMC 抗擾性: EN 50082-2(1995)
EMC 放射性: 符合EN 55011(1997)一級的要求
空氣:
氣體消耗量: zui多需要80psi,流量為100立方英尺/分的氣體5-10秒(VDA標準要求的比較少)
壓縮空氣: 壓力80psi,流量為100立方英尺/分
壓縮空氣管道的內徑:SAE測試: 3/4英寸(19mm)或更大
VDA測試: 1/2英寸或更大
空氣槽容積: 30加侖
運行溫度: -30℃---40℃
zui大相對濕度: 溫度達到31℃時濕度80%,當溫度達到40℃時濕度線形的減少到50%
污染控制: 達到環境保護的2級
聲壓等級: 約為130dBA
海拔高度: 2000m
連續運行: 適用于連續運行
射槍筒內徑:
SAE J400:2.07英寸(52.6mm)
VDA: 11.42英寸(290mm)
平面檢測樣品尺寸:
4X6英寸(101.6 X152.4mm)
4X8英寸(101.6 X203.2mm)
4X12英寸(101.6 X304.8mm)
厚度zui高到7/16英寸(11.11mm)
也可以接受樣品的zui大寬度為4.125英寸(104.8mm)
Technical parameters of multi - functional and resistance to impact testing machine
EMC immunity: 50082-2 EN (1995)
EMC activity: meet the requirements of EN 55011 (1997).
Air:
Gas consumption: 80psi, flow is 100 cubic feet / min of gas 5-10 seconds (less than VDA).
Compressed air: pressure 80psi, flow rate of 100 cubic feet / min
Compressed air pipe diameter: SAE test: 3/4 inch (19mm) or more
VDA test: 1/2 in.
Air tank volume: 30 gallons
Operating temperature: -30 ---40
The maximum relative humidity: the temperature reached 80% degrees when the humidity of 40, when the temperature reached 31 degrees Celsius humidity linear reduction to 50%
Pollution control: 2 levels of environmental protection
Sound pressure level: about 130dBA
Altitude: 2000m
Continuous operation: it is suitable for continuous operation
Gun barrel inner diameter:
J400:2.07 SAE inch (52.6mm)
VDA: 11.42 inch (290mm)
Plane test sample size:
4X6 inch (101.6 X152.4mm)
4X8 inch (101.6 X203.2mm)
4X12 inch (101.6 X304.8mm)
The highest thickness to 7/16 inch (11.11mm)
MTG resistance to impact testing machine manufacturers can also accept the maximum width of the sample is 4.125 inches (104.8mm)