現貨 120-07 絲網印刷導電油墨

說明：120-07是一種可絲網印刷的導電油墨、涂料和粘合劑

適用于沖壓、絲網印刷、浸漬和注射器配藥。這個

產品與Kynar，Kapton，Mylar，Glass具有良好的附著力，也可用于低

透明導電氧化物等表面能涂層。不像傳統的傳導

材料方面，本產品具有很強的抗折性。120-07的一些應用

包括但不限于聚酰亞胺撓性電路、聚合物厚膜的EMI/RFI屏蔽

電路、薄膜開關、表面安裝設備的電氣附件和陽極

鉭電容器涂層。

典型固化特性：

粘度（cps.）26000-30000

填充銀

銀含量，固化>88

抗皺性佳

大體積電阻（Ω-cm）0.00003

片材電阻率（Ω/sq/mil）0.010

水解穩定性優異

有效溫度范圍（℃）-55至+200

建議的處理和固化：120-07已準備好供應使用。進一步變薄可能

加入少量稀釋劑120-08即可。在使用之前，一定要

繼續使用銀幣。大多數基材的性能在固化3至5分鐘后

110°C。當使用低表面能基板時，較高的固化溫度產生更好的

粘附。建議使用高固化溫度。建議終用戶

通過實驗確定適合個人應用的溫度和時間。

貯存期：25℃下保存6個月；5℃下保存9個月；或-10℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。

避免長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗

從皮膚上。

現貨 120-07 絲網印刷導電油墨

120-07
SCREEN-PRINTABLE, ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 120-07 is a screen-printable, electrically conductive ink, coating and adhesive
suitable for application by stamping, screen printing, dipping and syringe dispensing. This
product features excellent adhesion to Kynar, Kapton, Mylar, glass and can also be used on low
surface energy coatings such as transparent conductive oxides. Unlike conventional conductive
materials, this product is very resistant to flexing and creasing. Some applications for 120-07
include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film
circuitry, membrane switches, electrical attachments for surface mounted devices, and anode
coatings for tantalum capacitors.
TYPICAL CURED PROPERTIES:
Viscosity (cps.) 26,000 - 30,000
 Filler Silver
 Percent Silver, cured >88
 Crease Resistance Excellent
 Volume Resistance, max. (Ω-cm) 0.00003
Sheet Resistivity (Ω/sq/mil) 0.010
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +200
SUGGESTED HANDLING & CURING: 120-07 is ready to use as supplied. Further thinning may
be accomplished by adding small amounts of thinner #120-08. Prior to using, be certain to
resuspend silver. Best properties for most substrates result when cured for 3 to 5 minutes at
110°C. When using low surface energy substrates higher curing temperatures yield better
adhesion. Using maximum curing temperatures is recommended. End user is advised to
experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf Life - 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames.
Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove
from skin.