125-15 EXTREMELY CONDUCTIVE INK導電油墨

說明：125-15是一種具有*導電性的油墨/涂料，用于絲網印刷。

浸漬和注射器分配。該產品與卡普頓、聚酯薄膜、玻璃和

其他基材的種類。該產品的優異導電性使終用戶可以更窄地打印

和/或更長的電路跟蹤線，不影響總的大歐姆值。正確使用這個

此功能可顯著節省成本。與傳統的導電材料不同，這種產品

耐磨、耐刮擦、耐彎曲、耐壓痕。125-15的一些應用包括但不限于：

射頻識別天線，聚酰亞胺柔性電路的電磁干擾/射頻屏蔽，聚合物厚膜電路，薄膜開關和

鉭電容器涂層。

典型特性：

粘度（cps）29000

填充銀

銀百分比（固化）>84

抗皺性佳

大體積電阻（Ω-cm）0.00003

薄片電阻率（Ω/平方/密耳）0.010

水解穩定性優異

有效溫度范圍（℃）-55至+200

建議的處理和固化：125-15已準備好供應使用?？梢赃M一步細化

加入少量的CMI稀釋劑112-19和/或105-36。使用前，一定要混好重新懸浮

銀色的。在110°C下固化3至5分鐘后，大多數應用的性能佳。性能優異

通過在50°C至175°C的溫度下固化，也可在多種基材上獲得。終用戶是

建議通過實驗確定適合個人應用的溫度和時間。

貯存期：25℃下保存2個月；5℃下保存6個月；或-10℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免長時間

接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

125-15 EXTREMELY CONDUCTIVE INK導電油墨

125-15
EXTREMELY CONDUCTIVE INK
DESCRIPTION: 125-15 is an ink/coating with extremely high electrical conductivity for application by screenprinting,
dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a
variety of other substrates. The superior conductivity of this product allows the end user to print narrower
and/or longer circuit trace lines without compromising overall maximum ohm values. The proper use of this
feature can result in a significant cost saving. Unlike conventional conductive materials, this product is very
resistant to abrasion, scratching, flexing and creasing. Some applications for 125-15 include, but are not limited to,
RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and
coatings for tantalum capacitors.
TYPICAL PROPERTIES:
Viscosity (cps) 29,000
Filler Silver
Percent Silver (cured) > 84
Crease Resistance Excellent
Volume Resistance, max. (?-cm) 0.00003
Sheet Resistivity (?/square/mil) 0.010
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to +200

SUGGESTED HANDLING & CURING: 125-15 is ready to use as supplied. Further thinning may be accomplished
by adding small amounts of CMI thinner 112-19 and/or 105-36. Prior to use, be certain to mix well to re-suspend
silver. Best properties for most applications result when cured for 3 to 5 minutes at 110°C. Excellent properties
are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 175°C. End user is
advised to experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf life: 2 months at 25°C; or 6 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.