法國POWER SONIC蓄電池PS-12550S應急儲能

法國POWER SONIC蓄電池PS-12550S應急儲能

動力Sonic系列密封鉛酸蓄電池采用AGM(吸收劑玻璃墊)技術設計，以保證優良的性能和可靠性。他們被設計成 用于一般用途的浮動和輕循環應用，包括安全和防火系統、應急照明、UPS、玩具和醫療設備。

我們的一些PS系列電池是VDS批準的。VDS是的消防安全行業檢驗認證公司之一。他們在上 并出版了一套全面的消防和安全設備規則和指南。 VdS 是認證密封鉛酸電池的檢測機構之一。 我們的VDS批準的電池是*的可靠性的許多安全和消防系統。VDS質量密封證明我們的電池佳，可用于消防、安全和 d生命安全應用程序。

A number of our PS range of batteries are VdS approved. VdS is one of the world’s leading inspection and certification companies in the fire protection and security industry. They set international standards with the publication of a comprehensive set of rules and guidelines for fire protection and safety equipment. VdS is one of the only testing institutes certifying sealed lead acid batteries, our VdS approved batteries are indispensable for the reliability of many security and fire systems. The VdS quality seal certifies that our batteries are of optimum quality for use in fire, security and life safety applications.

特點

•吸附劑玻璃墊（AGM）技術性能優異

•閥門調節、免維護、防溢出結構

•功率/體積比，能量密度優異

•堅固 振動和抗沖擊ABS外殼和蓋子

·氣體復合技術

·5年設計壽命批準·

批準空運。D.O.T.、I.A.T.A.、F.A.和C.A.B.認證的

·U.L.rec. 歐格化

·ISO 9001：2015-質量管理體系

FEATURES • Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, maintenance free spill proof construction • Power/volume ratio yielding excellent energy density • Rugged vibration and impact resistant ABS case and cover • Gas recombination technology • 5 year design life APPROVALS • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized • ISO9001:2015 – Quality management systems

蓄電池的特點

電池在充電過程中,負極反應近似為還原反應,所以負極也稱為陰極。電池負極活性物質相對于正極有盈余,超細隔板透氣性好,能吸附全部電解液,使電解液在電池內部無流動性,同時又有自動開、閉的安全閥,保證了正極產生的氧氣,在電池內部循環的方式被陰極吸收,因而其原理稱為 陰極吸附式。由于電池具有*的內部設計結構,保證了電池內部氧氣循環復合的有效建立,具有以下幾個特點:電池在密封貧液狀態下運行;不需要補酸和添加蒸餾水,無需測量電解液比重,電池內部使用了不流動電解液;有效防止了電解液分層,自放電率小,可以立式和臥式兩個方向放置;能與通信設備同室安裝,采用陶瓷過濾器基本無酸霧逸出;不漏液、不腐蝕設備,對環境污染小,但運行時對環境溫度和浮充電壓要求較高;沒有記憶效應;比能量較高,具有較大電流放電能力。

充電循環應用：在20°C處施加2.35v/c-2.45V/c的恒壓充電(12VMonobloc為14.1~14.7V)，初始充電電流應設定在0.25C以下。切換到浮動 收取費用以避免濫收費用。“浮動”或“備用”服務：施加2.25v/c-2.30v/c的恒壓充電(在20°C下，12v的Monobloc為13.5到13.8伏特)，當保持在此電壓下時，電池就會啟動。 我會尋求自己目前的水平，并保持在一個*充電的狀態。溫度補償：循環和備用應用的充電電壓應與 溫度。隨著溫度的升高，充電電壓應該降低，以防止過充電，并隨著溫度的下降而增加，以避免充電不足。獲取更多收費信息，包括TE 溫度補償系數，請參閱功率聲速技術手冊/功率聲速充電器規范。充電器電源Sonic提供廣泛的充電器，適用于各種規格的電池 確實如此。有關我們的開關模式和變壓器式充電器的更多信息，請參考我們的網站。如果您在尋找西服方面有困難，請與我們的技術部聯系咨詢。 能干的充電器。欲了解更多信息，以獲得完整的有用下載，如產品目錄、材料安全數據表(MSDS)、*等。 伊翁等。

CHARGING Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifications.

CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have difficulty in locating a suitable charger. FURTHER INFORMATION Please refer to our website for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc.

特點

·通用VRLA電池

·吸收劑玻璃墊(AGM)技術，具有優良的性能

·功率和體積比，產生的能量密度

·VDS批準的型號

·閥 免維護防漏施工

·堅固的耐沖擊ABS外殼和罩阻燃劑UL 94：Hb和UL94：V0

·長期保質期低排放率

電池的結構

電池的基本結構是由正負極板、超細玻璃纖維隔板、電解液、安全閥、導電端子以及殼蓋、殼體組成。正負極板是電化學反應的區域,在板柵上敷涂鉛膏經過固化、化成等工藝處理后形成。正極板有效成分為二氧化鉛,負極板有效成分為海綿狀鉛,隔板為孔率在93%以上超細玻璃纖維組成。安全閥是一種排氣裝置,釋放多余的氣體,保持電池的氣密性和液密性,并保持電池內部壓力在的安全范圍內。電池端子與負載連接起到傳導電流的作用,電池槽和外殼由阻燃材料ABS或PP等樹脂材料組成。